Custom display stand manufacturer • Mumbai
Custom foldable display stands built around your product.
A display stand should not only look good. It should hold the right weight, fit the right quantity and perform throughout your campaign.
Option Print designs, UV prints and manufactures custom Sunpack display stands for FMCG brands, distributors, agencies and retailers. Every recommendation begins with your product size, weight, shelf quantity and usage requirement.
In-house manufacturing • Up to 700 stands per day • Pan-India delivery
01 — Requirement first
The right quotation starts with the right understanding.
Two stands with the same outer size can perform very differently. Product weight, shelf structure, quantity per shelf, material thickness and usage period all affect the final recommendation.
Tick what you already know. Whatever is still open, we work through with you before quoting.
Requirement checklist
Not sure about a point? Leave it — a missing answer is a question we ask, not a reason to delay a quotation.
02 — What we manufacture
Stand types, and the requirement each one suits.
Prices are not listed because every stand is customised — the structure follows your product, quantity and usage period.
03 — Guided selector
Which display stand fits your requirement?
Suggested direction
Final material and structure will be confirmed after reviewing your product details. This selector is a starting direction, not an engineering recommendation.
04 — Material
Why we build in Sunpack — and where we don't.
Sunpack is a polypropylene hollow board. It takes direct UV printing, resists water, folds flat for transport and holds its shape through repeat handling.
Sunpack is not automatically right for every product. The thickness and structure must match the product weight and intended use.
Material comparison
No material is universally better. This is how the four we are asked about most often compare on the points that usually decide a project.
05 — How an order runs
From your product details to a packed consignment.
Start here
Step 01 begins with your product details.
06 — Industries
What changes when the category changes.
07 — Our work
Stands we have manufactured.
No photographs in this category yet.
Dump bin, cutout, wobbler and shelf strip project photographs are pending — send them and they will appear here.
08 — About Option Print
Built from printing experience. Developed for better retail displays.
Option Print began in ordinary paper printing, where competition was almost entirely about price. The displays available to brands were either paper-based and short-lived, or acrylic and metal units that were expensive, heavy and awkward to move between stores.
We moved to Sunpack-based structures because, designed correctly for the product, they can be lightweight, foldable, water resistant, reusable and far easier to transport across India. The early years were spent explaining that alternative to customers.
A custom POS unit with a contour-cut header — designed around the product, printed and fabricated in-house.
In their words
What buyers say after the first order.
09 — Questions
Frequently asked questions.
Where the honest answer depends on your quantity or specification, we say so instead of quoting a number that will change.
Before you compare
Before you compare prices, compare what the stand is expected to do.
Share your product size, weight, shelf quantity, stand quantity and usage period. We will help you understand which structure and material suit the requirement.
Display stand types we manufacture
- Floor Display Stands — Free-standing units that hold multiple shelves of product in the aisle or at the store entrance.
- Countertop Display Stands — Compact units for the billing counter and counter-top space, sized for impulse-purchase products.
- Sunpack Display Stands — Display units built in Sunpack (polypropylene hollow board) — waterproof, lightweight, foldable and directly UV printable.
- Dump Bins — Open bins for loose or bagged stock that customers pick from directly — used for offers and clearance.
- Promotional Cutouts — Contour-cut standees and character cutouts used to draw attention at entrances and activation areas — foldable and easy to carry anywhere.
- Shelf Strips — Long printed strips that run along the shelf edge to brand a block of facings.
- Photo Booth Frames — Free-standing printed frames and selfie points for events, activations and internal campaigns.
- Custom POS Displays — Point-of-sale units designed from scratch around a specific product, shelf plan and store placement.
Capacity and capability
- 12+ — Years of experience. Printing and display manufacturing
- Up to 700 — Stands per day. In-house production capacity
- In-house — UV printing & fabrication. Printing, cutting and assembly under one roof
- Pan-India — Dispatch. Packed and shipped across India
How a display stand order runs
- 01. Requirement discussion — We start with your product — its size, weight, quantity per shelf, placement and how long the stand has to last.
- 02. Design and prototype — We design the structure and artwork layout, then build a physical sample so you can load your actual product into it.
- 03. In-house UV printing — Artwork is printed directly on the board on our own UV machines, so colour is checked and corrected in-house.
- 04. Precision fabrication — Cutting, creasing, punching and assembly are done in-house to the approved structure.
- 05. Quality inspection — Units are checked for print, fit, fold and load before they are packed.
- 06. Secure packaging — Stands are flat-packed and wrapped so they survive multi-leg transport.
- 07. Pan-India dispatch — Consignments are dispatched to single or multiple locations across India.
Industries we manufacture for
- FMCG — High-rotation SKUs that need repeat campaigns across many stores. Typical displays: Floor display stands, dump bins, shelf strips
- Food & Beverages — Bottles, jars and packs where weight is concentrated low down. Typical displays: Floor stands with reinforced base, bottle cradles, counter units
- Cosmetics & Personal Care — Small, light units sold at eye level or on the counter. Typical displays: Countertop displays with cells, tiered counter units, wobblers
- Pharmaceutical — Compact placement at the counter with clear, legible information. Typical displays: Counter displays, shelf strips, wobblers
- Electronics — Boxed products with accessories, often heavier than they look. Typical displays: Custom POS displays, floor stands with fewer, stronger shelves
- Retail Stores — Units that survive daily handling and can be moved between zones. Typical displays: Floor stands, counter displays, dump bins
- Events & Activations — Set-up and pack-down at multiple venues on a short timeline. Typical displays: Photo booth frames, promotional cutouts, foldable floor units
- Marketing Agencies — Client campaigns with fixed budgets, artwork files and deadlines. Typical displays: Any category — usually a set of matching units
- Distributors — Stock dispatched onward to many retail points. Typical displays: Foldable floor and counter units
Frequently asked questions
What is your minimum order quantity?
It depends on the stand type, size and whether a new structure has to be developed. Small counter units are viable at lower quantities than large floor stands, because tooling and set-up are spread across the run. Share the stand type and quantity you have in mind and we will tell you whether it is workable.
What details are required for an accurate quotation?
Product height, width, depth and weight; how many products go on each shelf and whether there is a back row; number of shelves; required stand quantity; indoor or outdoor placement; how long the stand must last; and the delivery location. With those we can quote a structure instead of guessing from an outer size.
Can you create a prototype before bulk production?
Yes. We build a physical sample so you can load your actual product and check shelf height, fit and stability. Prototype timelines and cost depend on size and structure.
Can Sunpack stands hold heavy products?
Sunpack can carry meaningful weight when the sheet thickness, shelf span and internal supports are designed for it. The limit is set by the load per shelf, not by the material alone. If the weight is beyond what the structure can safely hold, we will say so and suggest a different material or a different shelf plan.
Are Sunpack stands waterproof?
The Sunpack board itself is water resistant and does not soften like paper board when it gets damp, which is why it suits humid stores and wash-down areas. Printed surfaces and assembled joints still need reasonable handling, and long direct sun or rain exposure is a separate question — tell us where the stand will be placed.
Can the stands be folded for transportation?
Most of our floor and counter units are designed to fold or flat-pack, which reduces freight volume and damage in transit. Some custom structures are fixed by design — we will tell you which applies to your unit.
Do you deliver outside Mumbai?
Yes. We manufacture in Mumbai and dispatch across India, to a single warehouse or to multiple retail locations. Freight cost and timeline depend on the destination, quantity and packed volume.
Can you match our brand colours?
We print in-house on UV machines and work from your artwork files and colour references. Reproduction on Sunpack board is close but not identical to a coated paper proof, so for critical colours we recommend checking the printed sample before the bulk run.
What is the typical production timeline?
It depends on quantity, structure and whether a prototype round is needed. A repeat order of an approved structure moves faster than a new design. We give a date commitment once the structure and quantity are confirmed.
Can the design be changed after sample approval?
Small artwork corrections are usually manageable before the print run starts. Structural changes after approval mean re-cutting and re-checking, which affects both timeline and cost — so it is better to load your real product into the sample and confirm everything at that stage.
Which is better: Sunpack or cardboard?
Neither is better in every case. Cardboard can be cheaper at high quantities for short dry-indoor promotions. Sunpack is water resistant, holds shape longer and can be reused, which matters for multi-location campaigns and longer placements. The right answer follows from your product weight, placement and usage period.
Do you provide stand design support?
Yes. We design the structure and the print layout from your product details and artwork. If you already have a design, we review it for shelf strength, fold pattern and print suitability before production.
Guides
- How to Choose the Right Display Stand for Your Product — Nine practical checks — weight, shelf plan, placement, duration — that decide which stand type actually fits your product.
- Sunpack vs Cardboard Display Stands: Which One Fits Your Requirement? — A side-by-side look at water resistance, weight, reuse, transport and cost — and when each material is the sensible choice.
- What Information Is Required for an Accurate Display Stand Quotation? — The exact list of product and campaign details that let a manufacturer quote a structure instead of guessing from an outer size.
- Floor Display Stand vs Countertop Display Stand — How placement changes footprint, shelf count, stock quantity and cost per unit — and how to decide between the two.
- Why Product Weight Matters When Designing a Display Stand — Load per shelf, span, deflection and board thickness — the engineering behind a shelf that does not sag.
- Benefits of Foldable Display Stands for Pan-India Campaigns — Why flat-pack volume, assembly time and damage rate often matter more than the unit price on a multi-city rollout.
- How UV Printing Improves the Look of Retail Display Stands — What direct UV printing on Sunpack board does well, where it differs from a paper proof, and how to prepare artwork.
- Display Stand Buying Guide for FMCG Brands and Distributors — A buying process for repeat campaigns: specification, prototype, approval, bulk run, dispatch and reorder.
- Seven Details to Compare Before Choosing the Lowest Display Stand Quotation — Two quotations for the same outer size can describe very different stands. Here is what to line up before comparing price.
- What Affects the Cost of a Custom Display Stand? — Board area, thickness, print coverage, structure complexity, quantity and freight — the real cost drivers explained.
Contact Option Print
Address: Sakinaka, Andheri East, Mumbai, Maharashtra, India
Phone: +91 99302 75166 / +91 86898 51919
Email: info@optionprint.in
Hours: Mon – Sat: 10:00 AM – 7:00 PM IST
Service area: Pan India delivery from Mumbai
